2023. 3. 18. 14:27ㆍMaterial
Pengfei Wang, Lei Zhang, Xiong Huang, Jun Yang, Bo Li, Shuhui Yu, Rong Sun, Zhenxiao Fu, Xiuhua Cao
Abstract
It has generally been believed that the reliability of BaTiO3-based multilayered ceramic capacitors (MLCCs) is mainly contributed by hydroxyl (OH−), and the contribution of CO32− can be neglected. However, in this work, we demonstrated that the contributions of Ba/Ti ratio and CO32− play important roles in the delivering high reliability for BaTiO3-based MLCCs. The structure and performance of MLCC devices and ceramic chips based on BaTiO3 powders prepared by different approaches were studied. It is found that the intracrystalline pores in ceramics or MLCCs are mainly derived from the decomposition of BaCO3 during sintering, which has been demonstrated by ceramic derived from hydrothermal method powder and its modified powders. The point defects of Ba and Ti vacancies mainly originating from nonstoichiometric Ba/Ti rather than thermally stimulated have substantial influence on the migration of grain boundary that determines the grain size and whether the pores can be annihilated from the bulk material. Particularly, the Ti vacancies have a strong pinning effect and inhibit the migration of grain boundary effectively, due to their shorter migration distance comparing to Ba vacancies. Therefore, the synergetic effect of the second phase BaCO3 and point defects leads to the differences in the structure and performance.
'Material' 카테고리의 다른 글
| 히로시마대에서 납계재료 대체가능한 강유전성과 압전성에 우수한 세라믹제료개발 (1) | 2023.03.19 |
|---|---|
| 나고야대에서 두께1.8nm의 강유전체 나노시트, 저온에서 합성가능 (1) | 2023.03.19 |
| BME-C0G MLCC with Nickel Electrodes and the Role of Mn in CaZrO3–Based Dielectric (0) | 2022.11.20 |
| Calcined MnO2–ZrO2–SiO2 sintering aid for a non-reducible (Ca0.7Sr0.3O)1.03(Ti0.1Zr0.9)O2 dielectric material (0) | 2022.11.20 |
| (2022) MLCC용 유전체 소재의 연구개발 동향 (0) | 2022.06.10 |